Changing a tire:

To change a tire you need to get the tools to do so.

what's needed- a jack, a tire iron, any special tool for the lugs if needed,  wheel wedges and the new tire.

To begin, place the wheel wedges.

Then, loosen the nugs starting with any and loosening by every other lug First, then all of them.

After they are loosened, get the jack and look under the car. Try to place the tip of the jack so that it pushes on the differential or any other solid piece of metal. (if the jack can't reach you can use some small pieces of solid wood to extend the height of the jack)

Jack the car up until the tire can spin with nothing of the tire touching the ground.

Now finishing taking the lugs off and put them somewhere safe.

Take the tire off by either rocking it or pulling it and place the other tire in front of the wheel. line up the holes with the bolts and place the tire onto the wheel. tighten the lugs as much as possible and then let the jack down.

Now tighten all the lugs using the tire iron going in the dame patter used to remove the lugs.